#BEHRINGER UM2 DRIVER WINDOWS 10 MANUAL#
#BEHRINGER UM2 DRIVER WINDOWS 10 PATCH#
#BEHRINGER UM2 DRIVER WINDOWS 10 PC#

Then I get a call (or make one), and hear the click again, and mic shuts off (for Discord, anyway). But the odd thing is, it works in the mic test in Settings! If I click Let's Check in the Voice & Video tab of Settings, I hear the loud click, it turns on, and shows my mic working. This program seems to give everybody trouble. Is there a way to get ASIO to start when I boot up my PC?Ģ. This starts the ASIO codec, and it begins working (on other programs as well).

#BEHRINGER UM2 DRIVER WINDOWS 10 PC#

The interface signal lights up as normal, but my PC won't read it. Sometimes I'll turn on my PC, everything plugged in as it was when I last shut it off, and the mic won't work on anything. =)Īlso a few more things I just noticed today:ġ. If I get a chance sometime today I may try hooking things up to get an idea of where the gain might be to get a decent signal into Audacity or Reaper.Ĭlick to expand.Your suggestions seemed to have fixed the volume problem (when the mic decides to work, anyway). I do have a Behringer UMC404HD and a few mics that are around 15mv sensitivity.

#BEHRINGER UM2 DRIVER WINDOWS 10 MANUAL#

The MXL 440 manual states the current draw is < 3.0ma which the UM2 'shouldn't' have a hard time supplying. Don't be shy about getting up a bit closer and being closer can reduce room noise and depending on the mic can yield a more 'radio' like voice (bassy) due to proximity effect. With the distance I suggested and a normal speaking voice I would guess the gain knob might be about 12 to 2 o'clock to get the UM2's green signal LED to flicker on peaks of your voice depending on distance. The mic has a sensitivity spec of 15mv/PA which is about middle of the road for condenser mics and should give an OK signal into your interface. Sitting close is how close? For speaking you may want to be around 8'(20cm) to 12'(30cm) and be talking directly into the grill on the side of the mic with the MXL logo.

Audacity can not use ASIO, but the interface will show up in the options for input and output device if the interface is connecting OK.

You could also try to record this hum to check the USB connection to the computer and the software. This will check to see if audio is getting into the interface. While touching your finger to the tip of the plug on the loose end of the cable, turn the gain up on the plugged in channel and watch to see if the SIG Led turns green to indicate a signal and listen in the headphones for hum.

#BEHRINGER UM2 DRIVER WINDOWS 10 PATCH#

If by chance you have a 1/4'(6.5mm) instrument or patch cable, plug it into either the #1 Line input in the combo jack or the #2 INST input. It may or may not be the cause of the mic not working, but something easy to try. Since you're using Win10, check the setting for 'Windows 10 camera, microphone, and privacy'. Click to expand.- Are you hearing audio played from FL Studio or Audacity through the UM2 in the headphones or were you just stating you know the headphones work?

Behringer um2 driver windows 10